User guide

85
Configuration
Print a Configuration Label
7/10/07 105SL User Guide 11342L-003 Rev. A
Print a Configuration Label
A configuration label lists the printer settings that are stored in configuration memory. After
you load the media and ribbon (if necessary), print a configuration label as a record of your
printer’s current settings. Keep the label to use when troubleshooting printing problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT.
2. Press NEXT/SAVE PLUS (+) or PREVIOUS MINUS (-) to scroll through the parameters
until you reach
LIST SETUP.
3. Press SELECT to select the parameter.
4. Press PLUS (+) to confirm printing.
A configuration label prints (Figure 16).
Figure 16 • Configuration Label