User guide

67
Operations
Load Media in Cutter Mode
7/10/07 105SL User Guide 11342L-003 Rev. A
6. Thread the media past the inner media guide (1). Continue under the lower roller (2) and
the upper media sensor (
3). Ensure that the media touches the inner media guide.
7.
2
3
1
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.
Thread the media forward until it passes under the printhead assembly (1), under the
snap plate (
2), and through the cutter assembly (3). (An optional cutter catch tray (4) is
shown in this illustration.)
1
2
3
4