User guide

47
Operations
Load Media in Peel-Off Mode
7/10/07 105SL User Guide 11342L-003 Rev. A
To load media in Peel-Off mode, complete these steps:
1. Prepare the printer for Peel-Off mode.
Caution • While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose
all temporary settings, such as label formats, and you must reload them before you resume
printing.
If the printer has
the…
Then…
Rewind option a. If the rewind plate is installed, remove it from the print
mechanism.
b. Hang the rewind plate upside-down on the two mounting
screws on the inside of the front panel. Secure the rewind
plate to the front panel with two thumb nuts.