User's Manual Part 3

Operation
Operator Control Panel (OCP)
P1013772-001 Rev. A ( Draft 1 ) Zebra ZXP Series 8 Card Printer User’s Manual 43
Messages
Your printer is equipped with an OCP Display to provide printer status information. The
readout is controlled by three OCP Buttons directly below the OCP Display. The messages
displayed fall into three categories: Operational, Warnings, and Errors.
Operational
Operational Messages are displayed during the Printer’s normal operation.
MESSAGE DESCRIPTION
WAIT
INITIALIZING
Performing a self test on start up.
WARMING
Ready to accept a print job, roller heating.
READY
Ready and at temperature.
STANDBY
Printer is in “sleep” mode; i.e., power save mode.
PRINTING
Print job received, printing in process.
WARMING
PRINT JOB WAITING
Print job received, warming rollers to temperature.
OFFLINE
Status toggled (offline/online) via the OCP Advanced
Settings Menu.
WARNING
Indicates that additional OCP instructions need to be performed;
e.g., PRINT RIBBON LOW, etc.
ALARM
Indicates error messages need to be cleared before normal
operations can resume.
CANCELING
Cancel button was pressed, and the current operation is being
terminated.
COOLING
PRINT JOB WAITING
Print job received, cooling rollers to temperature.
MANUALLY INSERT CARD
FROM FRONT
Waiting for manual card feed (this function is set via the Card
Setup Tab; see page 60).