User's Manual Part 2

Installation and Setup
Loading a Print Ribbon
P1013772-001 Rev. A ( Draft 1 ) Zebra ZXP Series 8 Card Printer User’s Manual 21
Loading the Laminate Cassette(s)
Step 1. Remove the new roll of laminate from its packaging.
Step 2. Carefully following the guidelines in the following figure, place the laminate in
the cassette.
.
Step 3. Pull out an inch or two of laminate past the lip of the cassette.
Step 4. Close the cassette by firmly pressing the “clamshell” together. You will hear a click
and feel a detent when the halves of the cassette seat together.
Step 5. If the exposed end of the laminate is uneven or crinkled, cut it as square as you can
with scissors.
Upper Laminate Cassette
(Used on Both Z83 and Z84)
Lower Laminate Cassette
(Used on Z84 Only)