User's Manual Part 2

Operations

Adjust Media Sensors

P1009874-001 Xi4 User Guide 2/23/09

3. Using a thin, flat-blade screwdriver, loosen the upper media sensor adjustment screw.

4. Slide the upper media sensor along the slot to the desired position (for non-continuous

media with a notch or hole in the media, the sensor must be directly above the notch or

hole).

5. Tighten the adjustment screw to secure the upper media sensor.

6. Adjust the lower media sensor to match the new position of the upper media sensor. See

Lower Media Sensor on page 87.