User's Manual Part 2

73
Operations
Load Media in Rewind Mode (with Cutter Option)
2/23/09 Xi4 User Guide P1009874-001
20. Tighten the thumb screw (not visible from this angle) that is located on the bottom of the
outer media guide (
1).
21. Push down the printhead assembly (1), and then rotate the printhead-open lever (2)
clockwise until it locks into place.
The labels wind on the rewind spindle or core.
22. For instructions for removing the labels from the rewind spindle, see Remove Media Liner
from the Rewind or Peel Spindle on page 64.
1
12