User's Manual

EZ320 User Guide

Introduction to the EZ320

Thank you for choosing our Zebra

EZ320™ Mobile Printer. This rug-

ged printer is sure to become a productive and efficient addition to

your workplace thanks to its innovative design. Because it is made by

Zebra Technologies, you’re assured of world-class support for all of

your bar code printers, software, and supplies.

• This user’s guide gives you the information you will need

to operate the EZ320 printer.

• The EZ320 printer uses the CPCL programming language. To

create and print labels using the CPCL language, refer to the

Mobile Printing Systems CPCL Programming Guide and our

ZebraDesigner™ Pro and Zebra Set-up Utilities programs which

are all available at

www.zebra.com.

Unpacking and Inspection

Inspect the printer for possible shipping damage:

• Check all exterior surfaces for damage.

• Open the media cover (refer to “Loading the Media” in

the Getting Ready to Print section) and inspect the media

compartment for damage.

In case shipping is required, save the carton and all packing

material.

Reporting Damage

If you discover shipping damage:

• Immediately notify and file a damage report with the ship-

ping company. Zebra Technologies Corporation is not re-

sponsible for any damage incurred during shipment of

the printer and will not cover the repair of this damage

under its warranty policy.

• Keep the carton and all packing material for inspection.

• Notify your authorized Zebra re-seller.