User's Manual

22
EZ320 User Guide
Cable Communication
Caution • The printer should be turned o before connecting or
disconnecting the communications cable.
The mini USB Type B connector on the cable plugs into the
printer. The connectors are keyed to assure correct alignment;
do not try to force the cable if it does not plug in. The standard
USB Type A end of the cable must be plugged into the USB
port on a computer as shown in Figure 12. The EZ320 utilizes
the USB Open HCI interface driver allowing it to communicate
with Windows
®
based devices.
USB drivers are included in the Zebra Designer Driver which
can be downloaded from the Zebra Web site. Other terminals
or communications devices may require the installation of
special drivers to use the USB connection. Consult the manu-
facturer for further details.
Figure 12: Communications with a P.C.
USB Communications
Cable to Computer
Refer to Appendix A for
details.
Communications
Port