User's Manual

32
EZ320 User Guide
Resetting an EZ320 Printer
If the printer has locked up and is not responding to any operator inputs or
external commands from a connected terminal, you can perform a forced
reset as follows:
1. Press and hold the power button for 5 seconds and then release.
The printer will power down.
2. Re-start the Printer as usual. Any pending data in the printer will
have been deleted and must be re-sent.
Determining Your Printer Version
The printer build date is identied by the Year and Week codes of the printer serial number label
located on the bottom of the unit. (See Figure 16 below).
Zebra Technologies Corporation
EZ320
7,4V 15A
This product is covered by one or more Zebra US patents.Made in China
中
PLACE BAR CODE HERE
PLACE BAR CODE HERE
序列号:
XXEZSYYWWNNNN
XXX-XXXXXXXX-XX
PCC:
Figure 16: Determining Your Printer Version
2 Digit Product
Code
2 Digit
Customer Code
Site Code
Date Code
YYWWNNNN
Week (01-52)
Last 2 Digits of
year (00-99
Sequential Number
(00001-99999)
Resets each week