User Manual

MPA Project Document DOC #

XWING1 Users Guide

20110307-A

13 of 20

Confidential Material – Disclosure Strictly Prohibited.

1. Introduction

1.1. Background

XWING1 is a radio module that will provide Wireless Local Area Network (WLAN),

features to target MPA2 Motorola Solutions’ EMS products.

1.2. General Note

This is a living document. Some descriptions are based on the current phase of the

XW1 module design program. Changes to this document will occur without direct

notification to its users. Users who wish to have the latest information should co-

ordinate with the module team leader. The terms “preferred” and “recommend” are

used throughout this document. Preferred can be thought of as a “nice-to-have” or “in-

good practice”. The term “recommendation” should be taken as a stronger

implementation guideline where if not implemented performance degradation may occur.

1.3. Purpose

The purpose of this document is to provide a theory of ops and block diagram targeted

for module developers and product

1.4. Part Numbers

Part Number SKU

21-130752-01 3.3V VIO configuration

Diversity with WLAN and BT on

SHARED RF paths

Table 1 - Module Part Numbers and Description

1.4. Key Features and Standards supported

The XWING1 uses Texas Instrument WiLink 6.0 - WL1273 Single-Chip WLAN/BT/FM

Device (SoC) The XWING1 exploits only the WLAN and BT features. The 1273 has the

following feature sets:

1.4.1. WLAN

• WLAN Dual Band 802.11 a/b/g/n (MCS7-0, 20MHz Channel Bandwidth)

• WLAN MAC Baseband Processor and RF transceiver which is IEEE802.11a/b/g and IEEE802.11n

PICS compliant



Optimized for ultra low current consumption in all operating modes including extremely low power

modes