User's Manual Part 2

6 - 18 WT6000 User Guide
4-Slot Battery Charger
The 4-Slot Battery Charger charges up to four spare batteries.
Figure 6-18 4-Slot Battery Charger
Battery Installation
To install the battery:
1. Insert the battery into a battery slot.
2. Gently press down on the battery until it snaps into place.
Figure 6-19 Insert Battery into Slot
Battery Removal
To remove the battery, press the two release latches on each side of the battery and lift the battery out of the
battery slot.
NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1.
Battery Charging LEDs (4)
Power LED