User's Manual Part 1

4 - 6 WT6000 User Guide
Advanced Wi-Fi Settings
• Network notification - When enabled, notifies the user when an open network is available.
• Scanning always available - Select to let Google’s location service and other applications scan for
networks, even when Wi-Fi is off. Default - disabled.
• Keep Wi-Fi on during sleep - Opens a menu to set whether and when the Wi-Fi radio turns off.
• Always On - The radio stays on when the device enters suspend mode.
• Only when plugged in - The radio stays on while the device is connected to external power.
• Never - The radio turns off when the device enters suspend mode (default).
• Wi-Fi frequency band - Options: Automatic (default), 5 GHz only or 2.4 GHz only.
• Install Certificates – Touch to install certificates.
• Wi-Fi Direct - Select to connect to another device using Wi-Fi Direct.
• WPS Push Button - Select to connect to routers that have WPS Push buttons. See WPS Push Button on
page 4-8.
• WPS Pin Entry - Select to connect to routers using a PIN. See WPS Pin Entry on page 4-9.
• MAC address - Displays the Media Access Control (MAC) address of the device when connecting to Wi-Fi
networks.
• IP address - Displays the IP address of the device.
Additional Settings
• Regulatory
• Country selection - Displays the acquired country code if Auto is selected else displays the selected
country code. Default: Auto.
• Region code - Displays the configured region code for the device.
• Band and Channel Selection
• Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4
GHz only.
• Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available channels
menu. Select specific channels. Touch OK.
• Available channels (5 GHz) - Use to select specific channels. Touch to display the Available channels
menu. Select specific channels. Touch OK.
• Logging
• Advanced Logging – Touch to enable advanced logging.
• Wireless logs - Use to capture Wi-Fi log files.
• Fusion Logger - Touch to open the Fusion Logger application. This application maintains a history of
high level WLAN events which helps to understand the status of connectivity.
NOTE Advanced Wi-Fi settings are for the device not for a specific wireless network.