User's Manual Part 1
Wireless 4 - 3
5. Touch the desired network. If the network security is Open, the device automatically connects to the network.
For all other network security a dialog box appears.
6. If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch Connect.
7. If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST.
•
Touch the Phase 2 authentication drop-down list and select an authentication method.
•
If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
•
If required, touch User certificate and select a user certificate. Note: User certificates are installed using
the Location & security settings.
•
If required, in the Identity text box, enter the username credentials.
•
If desired, in the Anonymous identity text box, enter an anonymous identity username.
•
If required, in the Password text box, enter the password for then given identity.
8. Touch Connect.
9. Touch .
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when
out of range.
1. Touch > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch (three dots) > Add network.
4. In the Enter SSID text box, enter the name of the Wi-Fi network.
5. In the Security drop-down list, select the type of security. Options:
•
None
•
WEP
•
WPA/WPA2 PSK
•
802.1x EAP.
6. If the network security is None, touch Save.
7. If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Save.
8. If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST.
NOTE
By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for
a Proxy Server on page 4-4 for setting connection to a proxy server and see Configuring the Device
to Use a Static IP Address on page 4-5 for setting the device to use a static IP address.