User's Manual Part 1

Data Capture 3 - 7
Figure 3-9 Align NFC Antennas
The WT6000 pairs with the RS6000 and the (icon) appears in the Status bar.
NEED STEPS
Pairing Using Simple Serial Interface
T
o pair the RS507/RS6000 with the WT6000 using SSI:
1. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
2. Install the battery into the RS6000.
3. On the WT6000, touch > .
Figure 3-10 Bluetooth Pairing Utility
4. Using the RS507/RS6000, scan the bar code on the screen.
The RS507/RS6000 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the
RS507/RS6000 is attempting to establish connection with the WT6000. When connection is established, the
Scan LED turns off and the RS6000 emits one string of low/high beeps.