User's Manual Part 1

Getting Started 1 - 7
6. If necessary, use the dial to loosen and re-tighten the strap.
Figure 1-8 WT6000 and Wrist Mount
To remove the WT6000 from the wrist mount, press down on the release lever and slide the WT6000 out.
Figure 1-9 WT6000 Removal
Connecting a Scanner
The RS4000 scanner and the RS6000 imager can be used with the WT6000. See and RS409/RS419 Scanner on
page 5-8 for procedures for connecting the scanner to the WT6000. Refer to the RS6000 Product Reference Guide
for procedures for connecting the imager to the WT6000.
Release Lever