User's Manual Part 1

Getting Started 1 - 5
Starting the WT6000
When installed in a cradle, the WT6000 starts automatically as soon as power is applied.
When a charged battery is installed and the WT6000 is turned off, press the Power button to turn on.
When the WT6000 is powered on for the first time, it initializes its system. The splash screen appears for a short
period of time.
Figure 1-4 Splash Screen
The splash screen is followed by the boot animation screen and then the Home Screen.
Figure 1-5 Home Screen
IMPORTANT When trying to power on the device, a quick red blink of the Charging LED indicates that it does not have
enough battery power to turn on. Charge the battery or replace it.