User's Manual

User Guide
___________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
59
User Guide, WherePort IV D1300 REV A
© Copyright WhereNet, Corp. 2008 WhereNet Confidential
12.5.14. Version
Set the software version number.
VER m.nn<cr>
Where m is the major version and nn is the minor version.
Example:
VER 2.01<cr>
Sets the WherePort IV software version number to 2.01.
12.5.15. XPW
Set the password to the four character ssss.
XPW ssss<cr>
12.5.16. HWT (1)
Used to test the ISP port pins and set the WherePort IV password access flags.
HWT n<cr>
Where n is a value of 1 through 6. A value of 6 sets the default password.
Example:
HWT 2<cr>
12.5.17. Loader
LDR n/a WherePort IV Loader vm.nn
Enter loader mode to allow firmware update. It will time out after 80 seconds if there is no transfer.
Transfer format is xmodem 128 byte.
12.5.18. GQ
There are five different GQ commands. A number of arguments are possible for several of these
commands. The commands govern the operation of the WherePort IV when the mode is changed by the
system in response to a particular tag.