User's Manual

User Guide
___________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
56
User Guide, WherePort IV D1300 REV A
© Copyright WhereNet, Corp. 2008 WhereNet Confidential
12.5.5. Tag Id
Set the tag ID: (for 144 bit messages only). The valid range is 0 to 4,294,967,295.
TID n<cr>
Example:
TID 4<cr>
Sets the tag id to 4.
Considerations:
The tag ID is only set using a 144 bit message.
12.5.6. Response
Set the tag WherePort IV response blink type (applies only to 27 bit and 44 bit messages):
RSP n<cr>
72 bit
144 bit
Example:
RSP 1<cr>
Sets the response blink type to 72 bits.
12.5.7. Count
Set the WherePort IV response blink count (44 bit message only):
CNT n<cr>
Valid range for n is 0 through 15.