User's Manual
User Guide
___________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
13
User Guide, WherePort IV D1300 REV A
© Copyright WhereNet, Corp. 2008 WhereNet Confidential
Figure 5 The WhereTag in a WherePort IV Capture Area
In mode 1, the re-trigger is set for a time interval after the WherePort IV blink. When this interval
elapses, the tag will transmit a blink if the tag is still in the same WherePort IV field. Without the re-
trigger interval being set, the tag will continue blinking in response to the WherePort IV signal.
If the tag enters a new field, it will transmit a blink, even if the set interval has not elapsed (see Figure 2).
Figure 6 Retrigger Mode 1 and a New Capture Area