User's Manual

User Guide

___________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

User Guide, WherePort IV D1300 REV A

Figure 4 The WhereTag III and WhereTag III ST

The solid line shows the orientation of the pick up coil for both WhereTags.

6.1. WhereTag Responses

The tag can be programmed to respond in a variety ways when it detects a WherePort IV signal. There

are three defined modes (see Figure 5).

Mode 1 The tag enters the field, blinks and then blinks again if it is still in the field after the

retrigger time out.

Mode 2 The tag enter the field, blinks and then does not blink again until it leaves the field and the

retrigger time out expires.

Mode 3 The tag enters the field, blinks and then blinks again after it has left the field and the

retrigger time out expires.

Coil Orientation