User's Manual

User Guide

WherePort III User Guide

ll other trademarks are the property of their respective owners.

Figure 42 Mounting Bracket

8.3 Installation Procedure

Step 1 Determine mounting location based on Zebra Enterprise Solutions site design

worksheet.

Step 2 Determine orientation of WherePort compared to mounting surface.

Choose bracket hole depending on pole mount, side mount, or rear mount.

Break bracket tab for rear mount (Figure 42). Mount bracket to wall using #

8 (4 mm) screws (not supplied) or ½ in (12 mm) straps for pole mount.

Step 3 Mount WherePort to bracket using supplied hardware.

For Angled

Mount

For Side

Mount

For Rear

Mount

Break Off Tab for

Rear Mount

Hole for Wall

Mount

Slots for Pole

Mount