User's Manual

User Guide

WherePort III User Guide

ll other trademarks are the property of their respective owners.

7.5.14 Version

Set the software version number.

VER m.nn<cr>

Where m is the major version and nn is the minor version.

Example

VER 2.01<cr>

Sets the WherePort software version number to 2.01.

7.5.15 XPW

Set the password to the four character ssss.

XPW ssss<cr>

7.5.16 HWT (1)

Used to test the ISP port pins and set the WherePort password access flags.

HWT n<cr>

Where n is a value of 1 through 6. A value of 6 sets the default password.

Example

HWT 2<cr>

7.5.17 Loader

LDR n/a WherePort Loader vm.nn

Enter loader mode to allow firmware update. Will time out after 80 seconds if there

is no transfer. Transfer format is xmodem 128 byte.

7.5.18 GQ

There are five different GQ commands. A number of arguments are possible for several

of these commands. The commands govern the operation of the WherePort when the

mode is changed by the system in response to a particular tag.

GQ1

Set message length = 10 bit

Execute immediately

GQ1 n

Set WPID = n, where 0 ≤ n ≤ 7