User's Manual

8 : UWD-3100 DartWand Software User Guide 1.0

Setting up DartWand

Install the barcode scanner

Installing a barcode scanner is optional.

To install the barcode scanner:

1 Install the scanner per manufacturer’s instructions. Many USB scanners do not require a driver and

you can just plug them in to a USB port on your machine.

2 If needed, configure the barcode scanner to append a carriage return (CR suffix) after each scan.

Connect the DartWand hardware

Before you connect the DartWand hardware, make sure you have installed the DartWand software.

To connect to the DartWand hardware:

 Connect the DartWand hardware to the computer using the supplied USB cable.

Make sure to use a powered USB port. Do not connect to an unpowered USB hub.

Start the DartWand software

When you have installed both DartWand software and hardware, you can run the software.

To start the DartWand software:

 Double-click the DartWand shortcut on your desktop.