User's Manual

___________________________________________________________________________

WhereWand II User’s Guide

___________________________________________________________________________ 71

WhereWand II User’s Guide D1258 rev A

WhereNet Confidential

The user should select Percon Falcon 320 (WhereWand) and then click <Next>.

The next screen will direct the user to cold-boot the WhereWand. This is done by

pressing <CTL><ALT><DEL> simultaneously on the WhereWand. When the

WhereWand display shows “WAIT”, the user should press <ESC><DEL>

simultaneously. This happens quickly, so it is suggested that the user locate all

these keys and be ready to press them before starting this step. The directions are

shown in figure 60.

Figure 60: PDT Install WW Boot