User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 60
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 50: Location Sensor Confirm Reboot
The user can press <Y> to proceed and re-boot the Location Sensor, or hit <Esc>
to cancel the operation. It takes 15 seconds to send the reboot sequence from the
WhereWand to the Location Sensor. The LED on the Location Sensor will flash
on and off at a 1 second rate if the link is functional and the command is being
received correctly. Press any key during this time will stop the transmission.
During this time, the screen shown in figure 51 is displayed.
Figure 51: Location Sensor Rebooting