User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 50
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 38: WherePort Phase
Figure 39: Multi-WherePort Phase Example
5.3.6 Configure WherePort Tag Parameters
Options <F> <G> or <H> apply only to WherePort message length 43. These
parameters allow the user to set the tag’s WherePort response configuration
parameters. This allows the user to globally change the way tags respond to
WherePorts without configuring each tag. Any tag that passes within the field of a
0°
90°
180°
90°