User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 47
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 35: WherePort Message Length
5.3.3 Configure WherePort Tag Response
Selecting <C> from the set WherePort configuration screen allows the user to set
how the tag will respond to the WherePort message. This is only applicable to
message lengths of 27 and 43. The options are to have the tag send 72-bit blinks
or 152-bit blinks. Both will contain the 15-bit WherePort ID. Figure 36 shows the
tag response screen.
Figure 36: WherePort Tag Response