User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 45
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Table 2: WherePort Message Parameters
WherePort Message Length
Parameter Message
Length 9
Message
Length 27
Message
Length 43
Message
Length 143
WherePort ID 8 - 15 0 - 32,767 0 - 32,767
Tag Response 1: 72-bit blinks
3: 152-bit blinks
1: 72-bit blinks
3: 152-bit blinks
Power 1 - 8 1 - 8 1 - 8 1 - 8
Phase 0°, 90°,
180°, 270°
0°, 90°, 180°,
270°
0°, 90°, 180°,
270°
0°, 90°, 180°,
270°
WP Count 0 - 15
WP Interval 5 sec - 1 min
WP Retrigger 1 sec - 2 min,
3 modes
Buffer 1 12 hexadecimal
characters
Buffer 2 12 hexadecimal
characters
<F1> or length 9 is the legacy mode compatible with some early installations and
only supports a WherePort ID between 8 and 15. The tag will send normal 56-bit
messages with the WherePort ID embedded in the 4-bit status. This message will
work with WhereTag II V2.0 and WhereTag II V2.1.