User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 42
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
If the SystemBuilder ID was not found in the file, the error message shown in
figure 31 will be displayed.
Figure 31: SB Configuration Error
5.3 Manual WherePort Configuration
Selecting <F2> from the set WherePort configuration screen allows the user to
manually select and modify some or all of the WherePort parameters. The
WhereWand will display the screen shown in figure 32.