User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 40
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 28: Set WherePort Configuration
5.2 SystemBuilder WherePort Configuration
Selecting <F1> from the set WherePort configuration screen allows to use
predefined configurations. The first step is to complete the site design using
SystemBuilder. One of the outputs of this operation is the file
WherePortLocations.txt. Copy this file to the following directory on the VSS
server:
C:\Program Files\WhereNet\PDT\PDT\PDT Install\link\.
Next use PDT Install to re-install the WhereWand Utilities, as described in section
3.1 and in appendix A. The WherePortLocations.txt file will be installed on the
WhereWand during this operation.