User's Manual

___________________________________________________________________________

WhereWand II User’s Guide

___________________________________________________________________________ 39

WhereWand II User’s Guide D1258 rev A

WhereNet Confidential

5 WHEREPORT UTILITIES

The user enters the WherePort utilities by press <F2> from the WhereWand

utilities screen shown in figure 3. The WherePort utilities allow the user to set and

read WherePort configuration. Communications with WherePort devices require

the use of the configuration cable included with the WhereWand in the shipping

box. This cable is a standard 10-conductor RJ-45 cable. Figure 27 shows the

WherePort Utilities screen. The magnetic field in the WherePort will be disabled

while connected to the WhereWand via the configuration cable.

Figure 27: WherePort Utilities

5.1 Set WherePort Configuration

To set the WherePort configuration, the user press <F1> from the WherePort

utilities screen. The set WherePort configuration screen is shown in figure 28.