User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 38
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
4.4 Turn Tag Off
When the user selects <F3> Read Config from the Tag Utilities screen, the
WhereWand screen changes to the tag ID entry screen for turn off. The user can
either scan the tag bar code using the WhereWand laser scanner or manually type
the tag ID using WhereWand keypad. The WhereWand will automatically
determine the correct protocol for communicating with the WhereTag or
WhereCall based on the tag’s unique identification on the bar code label. The
WhereWand will set the tag blink interval to OFF, and set the number of
WherePort blinks to 0. Figure 26 shows the turn tag off ID entry screen.
Figure 26: Turn Tag Off ID Entry