User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 35
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
4.3 Read Tag Configuration
When the user selects <F2> Read Config from the Tag Utilities screen, the
WhereWand screen changes to the tag ID entry screen for tag read. The user can
either scan the tag bar code using the WhereWand laser scanner or manually type
the tag ID using WhereWand keypad. The WhereWand will automatically
determine the correct protocol for communicating with the WhereTag or
WhereCall based on the tag’s unique identification on the bar code label. Figure
22 shows the read configuration tag ID entry screen.
WhereTag products with IDs less than 17,100,000 must be separated from other
nearby tags by 18 inches or more when reading the tag to ensure other tags do not
respond and collide with the response of the desired tag.
Figure 22: Tag Read ID Entry
____________
Note
____________