User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 34
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
4.2.10 Custom Configuration Long Message Interval
Selecting <J> Long Intrvl from the custom configuration screen 2 will allow the
user to set the tag up to periodically send long message blinks with the 12 byte tag
data register contents appended to the message. This periodic long message can be
disabled by selecting OFF, or it can be set to occur at every 8
th
or 64
th
normal keep
alive blink. If ALL is selected, every tag blink including WherePort and switch
event blinks will be long. As soon as the user selects an interval, the WhereWand
application will return to custom configuration screen 2 to allow another parameter
to be selected and modified. The user can press <ESC> to return to the previous
menu. Figure 21 shows the RX wakeup screen.
Figure 21: Custom Config Long Interval