User's Manual

___________________________________________________________________________

WhereWand II User’s Guide

___________________________________________________________________________ 31

WhereWand II User’s Guide D1258 rev A

WhereNet Confidential

4.2.7 Custom Configuration Switch Retrigger

Selecting <G> Sw Retrigger from the custom configuration screen 1 will allow the

user to set the switch event retrigger time. The same switch event will be ignored

until the retrigger timer expires. The timer starts after the tag has sent its last

switch event blink. The retrigger times range from 1 second to over 1 minute. As

soon as the user selects a retrigger time, the WhereWand application will return to

custom configuration screen 2 to allow another parameter to be selected and

modified. The user can press <Enter> to go between the retrigger pages, or

<ESC> to return to the previous menu. Figure 18 shows the available intervals.

This configuration parameter applies only to tags with ID greater than 17,000,000.

Figure 18: Custom Config Switch Retrigger