User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 30
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 16: Custom Config Switch Blinks
4.2.6 Custom Configuration Switch Blink Interval
Selecting <F> Sw Interval from the custom configuration screen 1 will allow the
user to set the interval between switch event blinks. As soon as the user selects an
interval, the WhereWand application will return to custom configuration screen 2
to allow another parameter to be selected and modified. The user can press
<ESC> to return to the previous menu. Figure 17 shows the available intervals.
This configuration parameter applies only to tags with ID greater than 17,000,000.
Figure 17: Custom Config Switch Blink Interval