User's Manual

___________________________________________________________________________

WhereWand II User’s Guide

___________________________________________________________________________ 26

WhereWand II User’s Guide D1258 rev A

WhereNet Confidential

4.2.3 Custom Configuration WherePort Blink Interval

Selecting <C> WP Interval from the custom configuration screen 1 will allow the

user to set the interval between each blink the tag sends in response to receiving a

valid WherePort message. These blinks will include the WherePort ID the tag

received in the message. The interval can range from 5 seconds to 1 minute. As

soon as the user selects one of the available intervals, the WhereWand application

will return to custom configuration screen 1 to allow another parameter to be

selected and modified. The user can press <ESC> to return to the previous menu.

Figure 13 shows the available intervals. This configuration parameter applies only

to tags with ID greater than 17,000,000.

Figure 13: Custom Configuration WP Interval