User's Manual

___________________________________________________________________________

WhereWand II User’s Guide

___________________________________________________________________________ 25

WhereWand II User’s Guide D1258 rev A

WhereNet Confidential

4.2.2 Custom Configuration WherePort Blink Count

Selecting <B> WP Count from the custom configuration screen 1 will allow the

user to set the number of blinks the tag will send in response to receiving a valid

WherePort message. These blinks will include the WherePort ID the tag received

in the message. WherePort blinks can be disabled by selecting <F1> 0. The tag

can send up to 15 blinks in response to a WherePort message. As soon as the user

selects one of the available blink counts, the WhereWand application will return to

custom configuration screen 1 to allow another parameter to be selected and

modified. The user can press <Enter> to move between blink count pages, or

<ESC> to return to the previous menu. Figure 12 shows the available blink

counts. This configuration parameter applies only to tags with ID greater than

17,000,000.

Figure 12: Custom Config WP Blink Count