User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 19
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
Figure 5: Set Tag Configuration
4.1 Default Configurations
Selecting one of the default configurations options <F1> through <F4> from SET
CONFIG screen will bring up the appropriate tag ID entry screen. The user can
either scan the tag bar code with the laser scanner on the WhereWand, or manually
type the tag ID using the WhereWand keypad and then hitting <Enter>. The
WhereWand will then open the tag communications link and send the default
configuration. Once the tag has been successfully configured, the WhereWand
will indicate the status of the communications. Figure 6 shows the default
configuration tag ID entry screens. Figure 7 shows the communications success
screen. To see what the default configuration settings are, the user can configure a
tag and then read the configuration back.