User's Manual

___________________________________________________________________________
WhereWand II User’s Guide
___________________________________________________________________________ 18
WhereWand II User’s Guide D1258 rev A
© Copyright WhereNet, Corp. 2002
WhereNet Confidential
4 WHERETAG/WHERECALL UTILITIES
The user enters the WhereTag / WhereCall utilities by pressing <F1> from the
main utilities screen. The WhereTag / WhereCall utilities allow the user to
configure and read tags. The tag utilities screen is shown in figure 4.
Figure 4: Tag Utilities
Pressing <F1> puts the user into the set configuration mode. The user can select
from one of the default configuration tag types or set up a custom configuration.
Figure 5 shows the set configuration options. The WhereWand will automatically
determine the correct protocol for communicating with the WhereTag or
WhereCall based on the tag’s unique identification on the bar code label.