Installation Guide
Table Of Contents
- Overview
- Description of the MEA System
- Introduction
- Subscriber Devices (SDs)
- Wireless Routers (WRs)
- Intelligent Access Points (IAPs)
- VMM6300 - Vehicle Mounted Modem
- EWR6300 - Enhanced Wireless Router
- PWR6300 Portable Wireless Router
- Mobile Internet Switching Controller (MiSC)
- Operational View of the MEA System
- Network Architecture
- Unified Modes of Operation
- Quality of Service (QoS) and User Priority Features
- Setup and Installation
- Subscriber Device (SD)
- Intelligent Access Point (IAP)
- Wireless Router (WR)
- Mobile Internet Switching Controller (MiSC)
- Upgrade MiSC/DHCP Configuration (optional)
- MAC Address Tables
- Site Selection/Deployment Guidelines
- Customer Service Information
- License and Warranty Information
- FCC Regulatory Information
- Safety Information for the MEA Products
- Safety Certification
MeshNetworks
Associations Tab
The Associations Tab is an information only window as is shown in Figure 39.
Figure 39. MEA Device Administration Associations Tab
This window displays all devices currently associated with an IAP. There will always be at least
2 entries: one for the IAP’s SBC and one for the IAP’s transceiver. For every wireless router
and subscriber device currently associated with the IAP, there will be an additional entry in the
table.
Testing
Basic MiSC Tests
To verify the basic connectivity of the MiSC, conduct the following from the a computer
connected to the server subnet of the MiSC:
• Ping an IAP
• Ping the Core Router
• Ping the Edge Router
34