Installation Guide
Table Of Contents
- Overview
- Description of the MEA System
- Introduction
- Subscriber Devices (SDs)
- Wireless Routers (WRs)
- Intelligent Access Points (IAPs)
- VMM6300 - Vehicle Mounted Modem
- EWR6300 - Enhanced Wireless Router
- PWR6300 Portable Wireless Router
- Mobile Internet Switching Controller (MiSC)
- Operational View of the MEA System
- Network Architecture
- Unified Modes of Operation
- Quality of Service (QoS) and User Priority Features
- Setup and Installation
- Subscriber Device (SD)
- Intelligent Access Point (IAP)
- Wireless Router (WR)
- Mobile Internet Switching Controller (MiSC)
- Upgrade MiSC/DHCP Configuration (optional)
- MAC Address Tables
- Site Selection/Deployment Guidelines
- Customer Service Information
- License and Warranty Information
- FCC Regulatory Information
- Safety Information for the MEA Products
- Safety Certification
MeshNetworks
Specify the path and file name of the firmware bin file to be uploaded to the device. Or
click on the Browse button to navigate to the correct location of the firmware bin file. If
the Browse button is selected, the Choose file window is displayed as shown in Figure
26. Locate and select the desired firmware bin file to be uploaded to the device. Then
click on the OK button.
1.
Figure 26. MEA Device Administration Choose File Window
The path and file name of the firmware bin file will be displayed in the Update Device
Firmware window as shown in Figure 27. Click on the Upload button to continue the
process or select Cancel to terminate the Firmware Update procedure
24