Installation Guide
Table Of Contents
- Overview
- Description of the MEA System
- Introduction
- Subscriber Devices (SDs)
- Wireless Routers (WRs)
- Intelligent Access Points (IAPs)
- VMM6300 - Vehicle Mounted Modem
- EWR6300 - Enhanced Wireless Router
- PWR6300 Portable Wireless Router
- Mobile Internet Switching Controller (MiSC)
- Operational View of the MEA System
- Network Architecture
- Unified Modes of Operation
- Quality of Service (QoS) and User Priority Features
- Setup and Installation
- Subscriber Device (SD)
- Intelligent Access Point (IAP)
- Wireless Router (WR)
- Mobile Internet Switching Controller (MiSC)
- Upgrade MiSC/DHCP Configuration (optional)
- MAC Address Tables
- Site Selection/Deployment Guidelines
- Customer Service Information
- License and Warranty Information
- FCC Regulatory Information
- Safety Information for the MEA Products
- Safety Certification
MEA Setup and Installation
• MeshManager Server (Server, Monitor, Keyboard, Mouse), pre-installed with the
MeshManager software
• 5 Ethernet Cables
The Network Operator must supply the following:
• Physical location and AC power for the routers, switch, and server(s)
• Ethernet connection(s) from the switch to the IAP(s)
• Ethernet connection to Internet or to Network Operator’s private network (Custom IP
network configuration may be required depending on Network Operator’s network
configuration)
• Public address for Edge Router, DNS resolver address
• PC running Windows 2000 with an Ethernet Port for site-specific MiSC Configuration
and MeshView
• Optional Equipment:
• Geo Server
• T1 Network Extenders
13