User's Manual
Table Of Contents
- Enhanced Wireless Router
- Installation Requirements
- Installing the MEA Enhanced Wireless Router
- Device Administration: Configuring the EWR Devices
- External Device Provisioning
- Infrastructure Requirements
- EWR6300 Mounting Bracket
- License and Warranty Information
- FCC Regulatory Information
- Safety Information for the MEA Products
- Safety Certification
MEA EWR User’s Guide
6 x 32 x 3/4
Angle Locking Bolt
1/4 x 1 inch Pivot Bolt
(Requres 7/16 Wrench)
Figure 3-21. EWR Pivot and Angle Locking Bolts
NOTE: Some IAP6300 and MWR6300 enclosures may have a bolt or plug in the center of the
back of the box. To maintain the integrity of the box, DO NOT REMOVE THIS PLUG.
3.4.1 EWR MAC Addresses
This table has been included for recording the Ethernet MAC address and transceiver MAC
address for a set of EWR devices as a quick reference. These addresses will be required for
configuration and management of these devices.
EWR MAC Address
00-05-12-0A-xx-yy
EWR ETH MAC Address
00-05-12-30-xx-yy
29