User's Manual
Table Of Contents
- Enhanced Wireless Router
- Installation Requirements
- Installing the MEA Enhanced Wireless Router
- Device Administration: Configuring the EWR Devices
- External Device Provisioning
- Infrastructure Requirements
- EWR6300 Mounting Bracket
- License and Warranty Information
- FCC Regulatory Information
- Safety Information for the MEA Products
- Safety Certification
MeshNetworks
3 1/2 x 1/4 inch bolt
1/4 Flat Washer
1/4 Flat Washer
1/4 Lock Washer
1/4 Hex Nut
Note: All Hardware is Stainless Steel
Figure 3-20. C-Clamp Bracket Assembly
3.
4.
Position the bracket in the desired location and securely tighten the two bracket bolts.
If required, loosen the Pivot Bolt and the Angle Locking Bolt (Figure 3-18
) so that the
antenna connector is positioned vertically.
5.
6.
Tighten the Angle Locking Bolt using a #1 Phillips screwdriver.
Ensure that the antenna connector is still vertical and tighten the Pivot Bolt using a 7/16-
inch open-end wrench or socket wrench.
28