User's Guide
MEA WMC6300 Windows User’s Guide
45
MeshTray Routing Tab (Optional)
If your WMC6300 has been licensed to display routing information, an optional tab will be
displayed in MeshTray as shown in Figure 54. The Routing Table displays the end nodes that
the WMC6300 is currently in communication with. The Neighbor Table displays the adjacent
nodes that the WMC6300 may route through, depending on the desired end node.
Figure 55. MeshTray Routing Tab
The Last Rate column displays the last data rate used to transmit user data to the neighbor
destination. If no user data has been sent to the neighbor destination, a data rate of 1.5 is
displayed by default.