User's Guide

MEA WMC6300 Windows User’s Guide
37
Figure 47. MeshTray Configuration Tab Priority Settings
Setting the Priority Level for the WMC6300
Use the Priority drop-down box to select the desired priority level (Level_0 to Level_7) for the
address that will be assigned to the WMC6300. You should consult with your network
administrator to determine the overall priority scheme that is currently being observed for your
network application and the proper setting to be assigned to your device.
There is also an optional Emergency mode for use by special applications. The priority for use
in emergency mode is separately provisioned and must be explicitly enabled per node by the
network operator.
Addressing Scheme for Unified Modes of Operation
With MEA Release 3.0, the concept of modes has been replaced by a Unified Modes of
operation addressing scheme. The concept of unified modes of operation centers on the current
state of network communication: Associated State and Unassociated State. There are three
addressing schemes which allow the IT manager increased flexibility in deployment.