User's Guide

MEA WMC6300 Windows User’s Guide
33
MeshTray Configuration Tab
The Configuration Tab is used to set the parameters for Geo Mode and select the desired
Priority Level and Addressing Scheme settings.
Figure 46. MeshTray Configuration Tab
Geo Position
If Geo-Position has been enabled on the WMC6300, the Geo-Position option will be selectable
and the user may configure the reporting interval as shown in Figure 46. Otherwise, the Geo-
Position box will be grayed out.
Enhanced Geo Mode
If Enhanced Geo has been enabled on the WMC6300, an additional checkbox will appear to
allow the user to select that mode.
Reporting Interval
If Enhanced Geo has been enabled on the WMC6300, the user will be able to set the reporting
interval for updating the Geo-Position data for longitude and latitude or X, Y, Z positions for the
Spherical Coordinate option to be displayed on the Geo-Position tab.