User's Guide
MeshNetworks
28
Removing the WMC6300 Wireless Modem Card
The WMC6300 should be ejected using the following procedure to ensure that power to the card
is disabled prior to removal.
WARNING
Always eject card when not in use.
1. Click on the Unplug or Eject Hardware icon in the system task bar.
2. Select “Safely remove Generic Multifunction PC-Card” from the popup
menu as shown in Figure 37.
Figure 37. Unplug or Eject Hardware Icon
3. Wait for a message that indicates that the device may be safely removed
from the system as shown in Figure 38.
Figure 38. Safe to Remove Hardware - WMC6300 Card
4. Eject the WMC6300 from the PCMCIA slot as shown in Figure 39.
Figure 39. Removing the WMC6300 from the PCMCIA slot